Loxeal 60R – Cyanoacrylate Instant Adhesive for 3D Printing | Slow Cure
* Price may vary depending on order volume. For bulk orders, please request an individual quotation.
* Price may vary depending on order volume. For bulk orders, please request an individual quotation.
Specifically developed for 3D printing applications as an infiltrant to strengthen printed models produced using powder or granule-based technologies.
Its extremely low viscosity and delayed curing time allow deep penetration into parts and create an effective wicking action.
The use of Loxeal 60R not only increases mechanical strength but also improves surface smoothness and overall aesthetic appearance.
The alcoxy-ethyl formulation reduces blooming effect and ensures a clear, low-odour and non-irritating adhesive.
Particularly suitable for use in non-ventilated or enclosed areas, as it does not generate powder residues or excessive heat.
| Composition | Alcoxy-ethyl cyanoacrylate |
| Colour | Clear / colourless |
| Viscosity at +25°C | 3 – 10 mPa·s |
| Specific weight | 1.06 g/ml |
| Gap filling | 10 – 30 microns |
| Flash point (ISO 2592) | See MSDS |
| Shelf life | 6 months in unopened packaging |
| Temperature range | −50°C to +80°C |